Tour de Fleece

I think I'm about to get my spinning wheel back in action!  It's been out of commission for over a year.  Most of that year was me not wanting to deal with the fact that it was broken.  Going to the Black Sheep Gathering inspired me to tackle the frustrating problem.  

My wheel, an Ashford Trditional, before I broke it

Long story short:
While disassembling my wheel for transport the pin that holds the axel in place broke inside the hub.
Hub cracked while we were trying to pull the axel out (not knowing that part of the pin was sill inside).
Hub cracked further from moving the wheel 3000 miles without completely disassembling it.
Luckily the glue holding two pieces of the hub together is what cracked, not the wood.
Figured out that part of the pin was still stuck in the axel.  
Tapped out the broken piece of pin with some brass rod (good thing I didn't get rid of a single piece of scrap from my college silversmithing, this only reinforces my pack-rat tendencies).
Glued the hub back together.
Tried to drill out the hole for the old pin (the new one is larger).
It didn't work...

Hub, clamped while glue dries.

The instructions say to take pliers and turn the drill bit by hand.  That's right, take pliers to a smooth sided drill bit and turn it with enough speed and pressure to drill through about two inches of wood.  What?


There isn't enough clearance between the wheel rim and hub for any kind of normal drill so I'm supposed to turn a dill bit by hand, with pliers.  


Through much annoying of people who don't know about wheels, but maybe know about wood or working in small spaces, I learned of the magic that is a right angle drill (or right angle adapter).  I'm going to buy or borrow one today.


And then I will have my wheel!!!


Actually, then I will be able to reassemble my wheel, but close enough.  


Inspiring Black Sheep Gathering photos:

Contemplative Alpaca 

Lamb

Friendly Ram

Pink Goat, not photshopped

My haul

I came home with almost four pounds of alpaca fleece (the reddish brown bag), an angora merino blend (the blue ball), and a braid of merino roving (the tan/cream/plum stuff).  This pile is super intimidating without my wheel, so fix my wheel I must.  

Several Projects at Once

My techno-geek gloves, still very much in progress. These were sort of a prototype for gloves that I wanted to knit Josh. His gloves are pictured below. As you can see I am also not very far along on that pair.




Steph's scarf, also very much in progress. I'm almost done with the second ball of yarn (Stephanie bought three). So not too much more to go.




And some sock yarn I just bought for myself (I had cupons). It is a rather pretty self striping colorway, in a yarn that the Harlot speaks very highly of.





I've been reading the Yarn Harlot's site, and some Elizabeth Zimmerman books this past week. They've got me all worked up and ready to knit (I hadn't been working on Josh's gloves at all before yesterday). Worl wears me down, I arrive home in a semi-comatose state and get very little knitting done.


I've been spinning too, but it looks pretty much the same as the last photos. Today my clunky wheel repair kit arrived! I'm excited to fix my wheel, and a little nervous. I have to drill into the hub of the wheel to install the new axel. Taking drill to wheel is giving me pause. I'll work up the nerve soon.

My Wheel!

The story is that my Mom aquired this wheel back in August. I had taken a spinning class this summer, and loved it, but spinning wheels are quite expensive. So I contented myself with the much slower process of drop spindeling. A friend of my Mom's asked her if she, "knew anyone who wanted a spinning wheel?" Boy did she.

She kept this secret for a few months. They took the wheel apart, bought a new suitcase to fit it, flew here, rented a car, left their luggage (with the wheel) at my house, came downtown to meet me for a birthday dinner, and suprised me with instructions on how to put my wheel back together. We did so the next morning, drove it waaaaay out to The Fold, in Marengo, IL. There, the lovely Toni gave it a quick once over, replaced/improved the scotch tension brake, set me up with a leader, and discovered that my wheel wasn't working.

What I had thought was "a little stiffness" from years of dissuse was actually the wheel starting to lock up on itself. Turns out the connection between the foot pedal and the wheel axel has a nasty tendency to do that. We ordered a kit to replace the axel and connecting parts, but it won't get here until mid December. In the meantime I've replace a missing nut on the axel bolt, which seems to be doing the trick. I keep having to adjust that jont, but the wheel isn't locking up anymore. So it should be useable until the repair kit arrives.

Yay! I love it!

Happy Birthday to Me!

My parents surprised me with a spinning wheel.

It's the 1964 model of the Ashford Traditional wheel, made from '64 to '66, in '67 they changed how parts of the wheel looked, so I know it's older.

This is a photo from Ashford's site.

I'll take a few pictures of mine soon.